Licence

A short summary. The licence terms below are binding.

You may

  • store the files and make backup copies
  • print as often as you like, on your own printer
  • adapt the files for your print, e.g. dimensions, orientation or supports
  • use the prints privately and give individual prints to people in your private circle
  • have a print service print for your private needs; it may use the file only for that and must delete it afterwards
  • reuse your own artwork freely

Not permitted

  • sharing, selling, swapping or uploading files, e.g. on model platforms, in the cloud, in forums or messengers
  • selling prints or using them commercially, including as promotional or prize items
  • selling printed housings, including as a kit or fully assembled
  • measuring, scanning or using files or prints as a template for your own similar products
  • removing or circumventing the marking of the files
  • using files to train AI

Every file is marked for you. Each file is individually linked to you when downloaded. This does not affect the print.

For clubs and companies the private licence does not apply. Write to info@dhinotec.com and we will find a solution.


Licence terms for digital print files

Version 1 of 15 November 2026. Translation of the German text above; both versions have the same content (section 12).

Section 1 Scope and definitions

(1) These licence terms apply to digital print files that DhinoTec UG (haftungsbeschränkt), Carl-Orff-Str. 10, 76669 Bad Schönborn, Germany ("we", "us") provides through the online shop dhinotec.com ("Files"). In particular, these are

a) print files for rolls that the InkRunner design tool generates from the customer's artwork ("Roll Files"), and

b) print files for housings and components of the InkRunner ("Housing Files").

(2) They supplement our General Terms and Conditions ("GTC"). Purchase, payment, delivery, withdrawal, the customer's rights in case of defects, our liability and the applicable law are governed by the GTC and by law. These licence terms govern what the customer may do with the Files.

(3) "Derived Files" are all files created from a File, for example by converting it to another format, scaling, editing, combining or splitting it. "Prints" are all objects made with a File or a Derived File. "Third parties" are all persons other than the customer and us.

Section 2 Licence

(1) Upon delivery, we grant the customer, for each File purchased, a simple (non-exclusive), non-transferable, non-sublicensable and perpetual right to use the File in accordance with these terms.

(2) The licence is granted to the customer as a natural person and for private use only. Use for commercial or self-employed professional purposes, and use by companies, associations or other organisations, is not included; it requires a separate agreement with us in text form.

(3) The customer may

  1. store the File on their own devices and make backup copies;
  2. print the File as often as they like, on 3D printers they own or operate themselves;
  3. adapt the File for their own printing, for example dimensions, orientation, supports or splitting;
  4. use the Prints privately and give individual Prints free of charge to people in their private circle;
  5. commission a print service to print for their own private needs. The print service may use the File only for that order and must delete it afterwards; the customer informs the print service of this.

(4) All rights that these terms do not expressly grant to the customer are reserved.

Section 3 What is not permitted

The customer may not

  1. pass on Files or Derived Files to third parties, whether for payment or free of charge, in particular sell, give away, swap or lend them, or make them publicly available, for example on websites, model platforms, cloud shares, forums, messengers or social networks. The only exception is passing a File to a print service under section 2(3) no. 5;
  2. sell or rent Prints, or otherwise hand them over for payment or any other consideration, use them commercially, or use them as promotional, prize or giveaway items;
  3. offer printing services to third parties using Files or Derived Files;
  4. remove, alter, obscure or circumvent the marking of Files (section 7);
  5. use Files or Derived Files to train, fine-tune or evaluate artificial intelligence or machine learning systems, or include them in datasets for such purposes.

Section 4 No copying of the design, no template for own products

(1) The Files contain design know-how that we do not disclose, in particular dimensions, tolerances, profiles and the structure of the geometry. We provide them solely for printing, not as design documentation.

(2) The customer may not

  1. use Files, Derived Files or Prints as a template, basis or reference in order to develop, manufacture or distribute their own or anyone else's products or print files that are identical or similar to the InkRunner, its rolls, housings or components, or that compete with them;
  2. measure, disassemble, scan, reconstruct or otherwise reverse engineer Files or Prints for that purpose, or adopt their geometry in whole or in part in their own designs;
  3. derive or replicate from the Files the process by which they are generated, or query the design tool by automated means for that purpose;
  4. assist third parties in such acts, or provide them with Files, Prints, or dimensions and design data obtained from them, for that purpose.

(3) The customer may still

  1. adapt the File for their own printing under section 2(3) no. 3;
  2. design accessories and additions for their own private use, as long as these are not passed on and contain no parts of the Files;
  3. use their own artwork freely, including outside the InkRunner;
  4. develop their own products that were created without using the Files or the Prints.

(4) Paragraph 2 is also a restriction, within the meaning of section 3(1) no. 2 of the German Trade Secrets Act (GeschGehG), on acquiring trade secrets by observing, studying, disassembling or testing. Mandatory statutory rights of the customer remain unaffected.

Section 5 Additional rule for Housing Files

Printed housings and housing parts may not be sold or otherwise handed over for payment, including as a kit, together with other parts or as a fully assembled device. This also applies if the customer holds a licence to sell printed rolls.

Section 6 Care of Files and customer account

(1) The customer stores Files and Derived Files in such a way that third parties cannot access them. In particular, the customer does not keep them in locations that are public or shared with third parties.

(2) The customer account and the download of Files are intended for the customer only. The customer keeps their login details secret, does not let any third party use the account and does not download Files for third parties.

(3) If the customer learns that one of their Files has come into someone else's hands, or that their customer account has been used by third parties, they inform us without undue delay, most easily by email to info@dhinotec.com.

Section 7 Marking of Files

(1) Each File is individually marked for the customer when it is downloaded, so that it can be traced back to them. This does not affect the printed result.

(2) The marking makes it possible to trace a File that was passed on without permission to the customer it was delivered to. Our privacy policy describes which data we process for this purpose.

Section 8 Rights in the Files, trade marks

(1) To the extent that copyright, design rights or other intellectual property rights exist in the Files, their content or the objects made with them, these rights remain with us or with the respective rights holders. The customer receives only the rights set out in section 2. The customer acquires a permission to use the Files, not ownership of them.

(2) The obligations under sections 3 to 6 are contractual obligations of the customer. They apply regardless of whether intellectual property rights exist in individual content.

(3) We acquire no rights in artwork that the customer adds to the design tool beyond what is necessary to generate and provide the Roll File. The GTC govern the rights in such artwork.

(4) These terms give the customer no rights in the names "InkRunner" and "DhinoTec" or in our logos. Prints may not be presented as original products made by us.

Section 9 Notes on printing

The printed result depends on the printer, material, settings and post-processing. What the Files are designed for is stated on the respective product page. Prints are not tested safety components; the customer decides which material to use and what to use the Prints for. The customer's statutory rights in case of defects in the Files remain unaffected.

Section 10 Term and termination

(1) The licence is perpetual.

(2) If the purchase is reversed, for example after a withdrawal or rescission, the licence for the affected Files ends.

(3) If the customer materially breaches section 3, 4 or 5, we may terminate the licence for the affected Files for good cause. Before doing so, we will ask the customer to remedy the breach. This does not apply if such a request has no prospect of success, in particular if a File has already been made publicly available.

(4) When the licence ends, the customer must delete the affected Files and Derived Files; we may block their further download and regeneration. After a termination, the customer may continue to use Prints already made under section 2(3) no. 4.

(5) If the customer culpably breaches section 3 no. 1 or section 4(2), they pay us a contractual penalty for each breach. We set its amount at our reasonable discretion; it depends on the severity and extent of the breach and on the degree of fault. The customer may have the amount reviewed by the competent court. The contractual penalty is offset against any claim for damages arising from the same breach.

(6) Our statutory claims, in particular to cease and desist, removal, information and damages, otherwise remain unaffected.

Section 11 Applicable version

(1) Each purchase is governed by the version of these terms that was published on the shop page "Licence" when the contract was concluded.

(2) Later versions apply to later purchases. They apply to earlier purchases only if the customer agrees.

(3) If we later provide a purchased File again or in an updated form, the same terms apply to it as to the original purchase.

Section 12 Language versions

These terms are available in German and English. Both versions have the same content. Where they can be understood differently, the interpretation more favourable to the customer applies.